TAKE YOUR SCOOTER TO THE NEXT LEVEL!
Mon-Fri 9am-10pm, Sat-Sun 10am-7pm
TM
TM
The Rim Stripe is a custom cut decal or sticker that fits perfectly along the lip of your scooter rim. Some people may call it rim tape or rim decal as well as safety stripe. We prefer to call it what it is, a stripe that fits around the rim…A Rim Stripe!
What does the Rim Strip do?
The Rim Stripe makes a drastic change in the look of your bike and is one of the cheapest accessories you can purchase. It gives you that racing, custom look that will definitely set your bike apart!
We recommend going with the Reflective Rim Stripe. As this will add a great safety feature to your scooter. A scooter is very difficult to see in the evening (night time) from its side and with The Reflective Rim Stripe on, the side will literally glow when any light hits it. We give this product a 5 star rating on safety.
Your Price: $19.97
Your Price: $19.97
Your Price: $19.97
Your Price: $19.97
Your Price: $19.97
Your Price: $19.97
Your Price: $19.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Your Price: $14.97
Here are a few samples of what your scooter rims will look like with our scooter rim reflective stripes.
The rim stripe comes in 4 quarters that are precision cut to fit each rim perfectly. This makes it extremely easy to apply. Simply follow the following instructions for best results.
Avoid installing on surfaces in direct sunlight. Surface temperature should not exceed 70 degrees.
Make sure your rims are clean and dry:
1. Use a degreaser to rid your surface of any oil and dirt
2. Use window cleaner to get rid of any remaining oil and dirt
3. Use rubbing alcohol to remove any soap residue
4. Let dry before proceeding
Applying:
1. Peel 1 stripe from the backing and place one end on the rim. Holding the stripe with one hand and guiding the application end with the other, press very lightly once desired position is determined.
2. The rim stripe is pre-curved to fit your specific rim but some bending of the stripe may be needed. Simply guide the rim stripe along the rim lip. The material can stretch but make sure you don’t pull too hard as it may distort the shape of the rim stripe.
3. Once you complete the first strip, repeat until your rim is completed. You can overlap as much as a ¼” and if you, for whatever reason, have a gap, please use some of the extra stripes included.
4. Once all is applies, make sure that the rim stripe is stuck pretty well and let sit to let the rim stripe set.
*Reflective rim stripes are more delicate than most other material used, so please be a little more careful with those.
You are viewing the text version of this site.
To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.
Need help? check the requirements page.